Kerio Control Box 3110, add-on, 250 users Guía de instalación Pagina 7

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 25
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 6
2.2 Configuration of network interfaces of the Internet gateway
7
Note: IP addresses can be assigned to printers either manually or by a DHCP server.
If a DHCP server is used, the printing machine is configured automatically and its
address is listed in the DHCP lease list. If configured manually, the printing machine
will be independent of the DHCP server’s availability.
Dynamic IP addresses will be assigned to local workstations (easier configuration).
Figure 2.1 Example of configuration of a network with assigned IP addresses
Notes:
1. The DNS domain in the LAN must be identical with the Active Directory domain (i.e.
company.com).
2. IP addresses 10.1.1.x with the subnet mask 255.255.255.0 will be used in the network
of the branch office. The Active Directory domain is not used in this network, so it is
necessary to create a local DNS domain filial.company.com.
2.2 Configuration of network interfaces of the Internet gateway
Internet gateway is a host (or a server) at the boundary of LAN and the Internet. In this
example, a server with Windows will be used. The Kerio Control firewall (see chapter 2.3) as
well as Kerio Connect will be installed on this server. Kerio Connect will be used as a mailserver
and groupware server.
Vista de pagina 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 24 25

Comentarios a estos manuales

Sin comentarios